IMPORTANT NOTICE, PLEASE READ:

JPI is doing it’s best to get instruments out but may have to shutdown again. So do NOT send your instrument back to JPI. Our RMA is down due to the Corona Virus. Sales staff are being tested. Phone system has long waits. Thank you 7-1-20

Your Cart 0 items - $0.00       

Dimensions

Data Download Jack

Center Pin:   —————- 2.5mm (Center pin(sig) -5v to -7v)
Mating Plug O.D: ——— 5.5mm;
Thread size: ————— 08 x .75mm
Washer: ——————— .315″ I.D, .394″ O.D. ( Nickel plated steel )
Nut: ————————– .065″ I.D. .394 O.D. across the flats.
Max panel thickness: — 1-3mm;
Panel cutout:  ————– .330″

** Can order from JPI. Call the Sales Department at 800-345-4574.

Instrument dimensions.

  • EDM-700/800:   –  2.5 x 2.5 x 8″ with 2 1/4 bezel, incl connector. (3 1/8″ size same as 760)
  • EDM-760:           –  3.25 x 3.25 x 8″ with 3 1/8 bezel. Incl connector.
  • Slim-line:           –  2.0 x .950 x 3.5″ box (mounting ears 2 3/4 wide).
  • FS-450/450M:   –  2.5 x 2.5 x 2.3″ deep incl connector.
  • EDM-900:           –  2.90″ deep (connectors recessed)- 5.32″ wide – 5.51″ high
  • EDM-930:           –  3.3″ deep(add 2″ for connectors)    -5.584″ wide – 5.11″ high
  • VM-1000C:        –  1.91″ deep(add 2″ for connectors) -5.59″ wide – 6.13″ high

Mounting screw size for EDM & FS-450.

6-32 X  0.15″ (3/16″)screws. Screws must not penetrate the bezel more than  1/8″ or  .120″  ( 3mm ) — on the EDM-700/800/760.  

** NoteLonger screws may damage plasma display – this is not covered under warranty.