J.P. Instruments » Technical Support » Video Tutorials » EDM900 Installation Video

EDM900 Installation Video

EDM900

EDM900 Installation Video

PLEASE NOTE: You can view the following videos in full screen size by clicking the screen -size box- on the playback bar.


EDM900 Installation Video
01:23  Adjusting Display Orientation
02:01  Wiring Connections
03:05  Crimping Tips
03:38  Wire Routing
04:35  Install EGT Probe
05:08  Remote Sender Placement
06:19  Fuel Flow Install
06:59  Fuel Tank Calibration
08:13  Pilot Programming
09:04 Adjust HP Constant
10:12  Using The Scanner
10:36  Leanfind Mode
11:12  Alarm Light