J.P. Instruments » EDM-900/930/960 Required Information
Your Cart 0 items - $0.00       

EDM-900/930/960 Required Information

PLEASE INCLUDE ALL REQUIRED INFORMATION AND DOCUMENTS SPECIFIED BELOW
Contact & Company Name: *
Phone: *
-
E-mail: *
Aircraft ID (N number)
Date: *

THE FOLLOWING DOCUMENTS FROM THE AIRCRAFT POH ARE REQUIRED IN ORDER FOR US TO CONFIGURE YOUR EDM.

Please check the Yes box to confirm that you will forward the required information (A-E) to us.
A. POH COVER PAGE *
B. ENGINE LIMITATIONS PAGE AND THE POWER PLANT INSTRUMENT MARKINGS PAGE (Please include the page before and after) *
C. FUEL TANK SIZE, FUEL LEVEL PAGE (Usable fuel) *
D. THE INSTRUMENT WILL BE CONFIGURED PER THE AFM & STC AFMS MARKINGS (No exclusions) *
E. Color Photos of markings on primary gauges is very helpful:
F. TYPE OF JPI EDM INSTRUMENT: (one of these choices) *

AIRCRAFT ENGINE INFORMATION

1. Aircraft Make/Model: *
2. Year *
3. Aircraft N-Number *
4. Aircraft S/N *
5. Engine Manufacturer: *
6. Engine Type: *
7. Is Engine Stock? (If “No” provide a Complete Copy of the STC and AFMS): *
8. Are there Engine/Airframe related STC?(If "Yes" provide a copy of STC & AFM Supplemental markings pages) *
9. Engine Temperature (Preference): *
10. Magneto Type: *
11. Magneto Part No.
12. Pressurized Magnetos?
13. Number of Fuel Level Gauges:
14. Switch operated gauges?
15. Number of Fuel Level Sending Units(Senders in series count as 1):
16. Number of Fuel Tanks(930/960 Displays 4 Tanks max.):
17. Fuel Level Sender Type (NOTE: Senders for Fuel Level not included in price, use existing aircraft senders):

18. Usable Fuel:

18A. Main Left:
18B. Main Right:
18C. Aux Left:
18D. Aux Right:
18E. Center Main Forward:
18F. Center Main Aft:
19. Tanis Heating System (Note: JPI Bayonet Probes must be used for CHT):
20. System Voltage:
21. You don't have fuel pressure installed in the instrument panel, but wanted as an option? (If "No" skip 21A and 21B)
21A. What limits Low?
21B. What Limits High?(Not available for Gravity systems)
22. Carburetor with Engine Driven Pump?
22A. Turbo Charged?
23. Fuel Injected Engine? *
24. Pressure Carburetor with return? *
25. If ordering EDM-960, where will you install the DAU’s?
26. ADDITIONAL OPTIONS $195 EACH (x2 for Twins):

Note: Non-Primary options are installer/customer configurable and will not be displayed on initial power up. Use EDM Config to enable. Fuel tank configuration may also need to be changed by the installer upon installation as part of the unit installation and set up. Airframe Hobbs/Tachometer times will have to be entered upon set up.

Thank You for your order. Revised 11/4/13 - JP Instruments: Fax (714)557-9840, (714)557-3805, (800) 345-4574, Kristie Ext. 201, Frank Ext. 202

REMEMBER you must complete your on line order after submitting this form. Return to the JPI product page to finish purchasing your EDM.