DOWNLOADED FILE IS : U000000.JPI —OVER 200 KB

NO HEADER FILES –  DO YOU HAVE AN OLDER EDM THAT IS 4+ YEARS OLD? YOU WILL NEED TO CHANGE TO “FAST Y”. (‘FAST’ LOCATED UNDER ‘DUMP’ SAME AREA AS DATE, TIME, AND TAIL NUMBER.) EDM NEEDS TO BE SET TO HIGH BAUD RATE – 19,200.

To Check for this FAST feature:

1. Go to pilot program mode (Hold both buttons to see PROGRAM).
2. Tap STEP until you see DUMP? N.
3. Hold both buttons until you see RECORD TIME 6.
4. Tap STEP until you see FAST? N. Tap LF to change N to Y.
5. Tap STEP until you see END Y. Tap STEP to exit.

**If you do not see FAST, then the EDM is set at 19,200. You’re OK.