J.P. Instruments » Technical Support » FAQ Knowledgebase » EDM will not power up
Your
Cart
0 items -
$0.00
Check Out

FAQ Details

EDM will not power up

August 17, 2012 by Craig Peyton
  • Check for tripped circuit breaker or fuse.
  • Verify power is reaching the EDM through the P1 connector on the rear of the instrument – must be above 11.5v.
  • Display glass cracked do to not following install instructions- $150.00 to replace display. 
  • Otherwise, return for repair: https://www.jpinstruments.com/jpirma/ for a RMA number before sending in the EDM.