J.P. Instruments » Technical Support » FAQ Knowledgebase » CHT/EGT’s are reading about half of what they should be.
Your
Cart
0 items -
$0.00
Check Out

FAQ Details

CHT/EGT’s are reading about half of what they should be.

August 16, 2012 by Craig Peyton

Probably set to Celsius. Reprogram …

  1. Go to set alarm limits (Both buttons… END Y… both buttons).
  2. Tap STEP until you see EGT-CHT followed by ENG F or ENG C.
  3. Tap or hold LF to switch between ENG C and ENG F.
  4. Tap STEP repeatedly to END Y.